Manual Sand Blasting Booth with Sand Blaster (Q26)
|FOB Price:||US $35,000-85,000 / Set|
|Min. Order:||1 Set|
|Min. Order||FOB Price|
|1 Set||US $35,000-85,000/ Set|
|Production Capacity:||300 Sets Per Year|
|Payment Terms:||L/C, T/T, D/P, Western Union, Paypal, Money Gram|
- Model NO.: Q26
- Principle: Manually Sandblasting
- Layout: Horizontal
- Kind: Manual Sand Blasting Machine
- Certification: CE, ISO9001
- Warranty: One Year
- Operate Type: Manually Continuous or Intermittent
- Features: High Efficiency, Environmental Protection
- Exporting Experience: Since 2009
- Material of Dust Collector: Cartridge Fliter or Needle Felt
- Trademark: Puhua
- Specification: CE
- HS Code: 8424300000
- Drive: Electric
- Control: PLC
- Automation: Semi-automatic
- Condition: New
- Customized: Customized
- After-Sales Service Provided: Engineers Available to Service Machinery Overseas
- Number of Guns: Customized
- Exporting Countries: USA, Russia, Australia, UAE, Mexico, Brasil, etc
- Recovery Model: Mechanical Recycling or Pneumatic Recycling
- Production Efficiency: 20-30m^2/Hour/Gun
- Transport Package: Stretched Film, Nylon or Customized
- Origin: Shandong China(Mainland)
Sand blasting booths is mainly used for surface cleaning and strengthening of steel, castings, aluminum alloy parts and other parts. Through the shot blasting can remove the complex work piece surface contamination, the oxide skin, welding slag, the waste paint and so on, causes the work piece surface to be bright and clean, simultaneously reduce the work piece internal stress, enables the work piece surface to obtain the strengthening, thus achieves enhances the work piece surface and the intrinsic quality goal.
The Sand Blasting Booths is ideal for the large-scale structures, widely used in blasting of hulls, stoves, boilers and wind power parts, etc. Large structures can move inside the Blast Room on work cars sliding on rails.
1. Sand blasting booths main compositions
Sand blasting chamber
Abrasive Storage Hopper
Abrasive recycling system
Electric control system
2. Structural characteristice
Sand blasting system
We fully take into account the operation convenience of the workers, specifically increased the sand blasting chamber operating space, set lighting system and platform, so that workers can operate convenient, effective and comprehensive.
The bucket elevator consists of speed reducer, upper and lower rolling barrel, transmission rubber belt, bucket elevator, enclosure and tightening device, etc.
This machine adopts advanced Model BE full shutter type separator. The separator is mainly composed of airwash area, barrel sift, conveying screw, abrasive hopper, manual abrasive controlling valve.
Abrasive recycling system
This machine adopts the patented shot valve produced of our company; it can accumulate a certain time in blasting, through the manual control to provide the shot ball to the blasting device.
Dust removal system
This machine adopts Cartridge or bag type dust collector, is exhausted air produced during working. The dedusting efficiency is up to 99.6%, powder density is less than 100mg/m3,much stricter than the national standard.
Electric control system
Set shot ball circulatory failure alarm function, if any parts of the system fails, the above components automatically stop running, to prevent the shot ball stuck and burning power device.
3. Our service:
|Reply your inquiry in 24 hours.|
|2||Experienced staffs answer all your questions in time.|
|3||Customized design is available.|
|4||Exclusive and unique solution can be provided to our customer by |
our professional engineers and staff.
|5||Special discount and protection of sales are provided to our distributor.|
|6||We are professional manufacturer of shot blasting Machine. |
Have a professional design team with more than 10 years design
experience engineers, competitive with good quality
|7||As an honest seller, we always use superior raw material, advanced |
machines, skilled technicians to ensure our products to be finished
in high quality and stable feature.
|8||Prompt delivery, site installation and commissioning.|
According to your requirements, the most suitable machine will be designed for your workpieces, please indicate the following details.
1. What kind of workpiece you clean?
2. The workpiece size, length, width, height and weight of maximum workpiece.
3. What's your production capacity per day (8 hours)?
4. It's my pleasure if you can provide details workpiece photos to us.
Based on these details information, the detailed technical proposals will be sent to you for reference.
4. Trade Information:
Settlement Currency: USD, RMB, EUR.
Trade mode: FOB (FCA), CIP, CFR, CIF, DDU, DDP, Turnkey.
Payment term: 30% deposit by T/T, the balance paid before delivery or L/C at sight.
Delivery time: Within 20-60 days according to different type equipment.
5. After-sale service:
1. Installation and commissioning issue: We will send one technicians to assist with machine installation and commissioning, customer pays for return tickets, hotel and diet. Customer need arrange skilled worker and prepare various installation machinery and tools.
2. Warranty time:12 months from date of commissioning completion, but no more than 18 months from date of delivery.
3. Supply full english documents: including general installation drawings, pit design drawings, manual book, electric wiring diagram, electric manual book and maintenance book, etc.
4. Exported experience : Many countries, such as The USA, Russia, UK, Ukraine, Australia, Malaysia, UAE, Egypt, Mexico, Brasil, etc.
Any question pls kindly contact with us and welcome to visit our factory in Qingdao!