| Customization: | Available |
|---|---|
| Application: | Large Steel Structure, Various Beams, Bridge, etc |
| Fuel: | Electric |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Parameter | Q698 | Q6812 | Q6915 | Q6920 | Q6925 | Q6930 | Q6940 |
| The effective cleaning width (mm) |
800 | 1200 | 1500 | 2000 | 2500 | 3000 | 4000 |
| Dimension of inlet opening (mm) |
1600*800 | 1200*400 | 1700*400 | 2200*400 | 2700*800 | 3200*800 | 4200*400 |
| The length of cleaning workpiece (mm) |
1200- 12000 |
1200- 16000 |
1200- 12000 |
1200- 12000 |
3000- 12000 |
2400- 12000 |
4500- 18000 |
| The speed of conveyor (m/min) |
0.5-4 | 0.5-4 | 0.5-4 | 0.5-4 | 0.5-4 | 0.5-4 | 0.5-4 |
| The thickness of cleaning steel sheet (mm) |
3-60 | 3-60 | 1.5-60 | 3-60 | 3-60 | 3-110 | 4.5-100 |
| Shot ball flow rate (kg/min) | 4*120 | 4*250 | 4*250 | 6*250 | 6*250 | 6*360 | 8*360 |
| The shot ball first loading (kg) |
4000 | 4000 | 4000 | 4500 | 4500 | 8000 | 11000 |
| Roll brush adjusting height (mm) |
200 | 200 | 350 | 450 | 600 | 850 | 900 |
| Air capacity (m3/h) | 22000 | 17560 | 19000 | 19550 | 27758 | 28050 | 38000 |
| Total power (kw) | 90 | 78.3 | 113.5 | 156.6 | 204.8 | 224.55 | 293.6 |
Blasting chamber
Shot blasting chamber shells adopt profile steel and steel plate welding structure, is a strong, sealing, spacious operation space for shot blasting of workpieces. Shot blasting chamber is made by room body shell, gate, wall around, lateral wall, roof after, guard board etc.
Blast wheel assembly
Blast wheel assembly is made up of blast wheel shell, motor, importing tube, leaf, impeller, directional set of pills, points wheel, block sand plate, guard board and other components, which leaves, guard board, etc all wear parts using 20% high-chromium cast iron.
Screw conveyor
The screws convey or consist of reducer, screw shaft, conveying Housing, rolling bearing with bases, etc. It is a kinds of standard abrasive/sand horizontal conveying device, is an important part of the abrasive recycling system of the blasting machine.
Bucket elevator
The bucket elevator consists of speed reducer, upper and lower rolling barrel, transmission rubber belt, bucket elevator, enclosure and tightening device, etc.
Separator
This machine adopts advanced Model BE full shutter type separator. The separator is mainly composed of airwash area, barrel sift, conveying screw, abrasive hopper, manual abrasive controlling valve.
Dust removal system
This machine adopts Cartridge or Bag type dust collector, is exhausted air produced during working. The dedusting efficiency is up to 99.6%, powder density is less than 100mg/m`3,much stricter than the national standard.
Electric control system
Set shot ball circulatory failure alarm function, if any parts of the system fails, the above components automatically stop running, to prevent the shot ball stuck and burning power device.
3. H Beam Shot Blasting Machine Features:
1. H Beam and steel structure sand blasting machine has three kinds of pass through type: Roller conveying pass through, trolley pass through, hanger pass through.
2. They are widely used in the industry of steel plate, steel structure, engineering machinery, bridge building and so on. By shot blasting, it can remove rust, oxide layers, welding slag and other pollutant and eliminate surface stress force.
3. After shot blasting, it can improve paint film adhesion with steel, improve anti-rust capacity, improve the quality and prolong the service life of steel structure.
4. The steel shots blasted by blasting turbines will be collected, purifying by shots circle system and continue to be used again for blasting turbines.
5. The working process flow of shots circle system: steel shots blasted by blasting turbines will be collected by portrait screw conveyor and delivered to bucket elevator then the bucket elevator will lift to air wash type separator.
6. After separating, the dust and broken steel shots will be removed away from steel shots and good steel shots will enter storage bin.
4. Roller Convey Shot Blasting Machine Cleaning Application:
Advantages:
| 1 | 10 years professional production experience in shot blasting machinery industry. |
| 2 | 22,000 m^2 production workshop, strong production capacity. |
| 3 | Professional senior engineer develop the best solution. |
| 4 | Strict quality control system, CE, BV, ISO9001 certificate available. |
| 5 | Main components adopt imported international famous brand. |
| 6 | Timely delivery, one hour to Qingdao port. |
| 7 | Professional after-sale service, Email will be reply in 24 hours. |
| 8 | Site installation and commissioning in your factory |
){kind=link}