Steel Q69 Roller Conveyor Used Shot Blasting Machine/Shot Blaster

• Customization: Available
• Application: Steel Plate, Steel Strucutre, H Beam, etc
• Fuel: Electric
• Model NO.: Q69
• Cleanliness: High Cleanliness
• Automation: Automatic
• Certification: CE, ISO9001, BV
• Feature: Critical Cleaning / Residue Free, Rust / Corrosion
• Condition: New
• Customized: Customized
• After-Sales Service Provided: Available to Service Machinery Overseas
• Industrial Experience: Over 20 Years Professional Design Experience
• Cleaning Process: Steel Shot, Sand Grit and Other Abrasive
• Shot Blasting Machine Material: High Chrome Castings, Zgmn13, Mn65, Q235A, etc
• Exported Countries: USA, UK, Russia, Australia, Mexico, Brasil, etc
• Blast Wheel: High Chromium Wear Resistant
• Key Words: Shot Blasting Machine
• Shot Blasting Machine Warranty: One Year
• Machine Type: Roller Conveyor Shot Blasting Machine
• Dust Collector: Cartridge Filters, Fireproof and Antistatic
• Packaging Detail: Pallet, Foam and Plastic Film/Customized
• Transport Package: Pallet, Foam and Plastic Film/Customized
• Specification: CE, Sa 2.5
• Trademark: Puhua
• Origin: Shandong China(Mainland)
• HS Code: 84243000
• Production Capacity: 200 Sets Per Year

Product Description

Q69 Type Conveyor Shot Blasting Machine For Steel Profiles 



Q69 Type Roller conveyor shot blasting machines are mainly used for treating long and/or flat components. The components continuously pass through the pre chamber, the blasting chamber, and the cleaning chamber on a special roller conveyor. Highly efficient turbines fixed on the machine housing make it possible to treat the components on all sides.

Type	Q698	Q6912	Q6915	Q6920	Q6925	Q6930	Q6940
The effective cleaning width(mm)	800	1200	1500	2000	2500	3000	4000
The room feed-in size(mm)	1000*400	1400*400	1700*400	2200*400	2700*800	3200*800	4200*400
The length of cleaning workpiece(mm)	1200-12000	1200-1600	1200-12000	1200-12000	3000-12000	2400-12000	4500-18000
The speed of wheel conveyer(m/min)	0.5-4	0.5-4	0.5-4	0.5-4	0.5-4	0.5-4	0.5-4
The thicksness of cleaning steelsheet(mm)	3-60	3-60	1.5-60	3-60	3-60	3-110	4.5-100
The section steel specification(mm)	800*300	1000*300	1500*300	2000*300	2500*700	3000*700	4000*300
The quantity of shot blasting(kg/min)	4*180	4*250	4*250	6*250	6*250	6*360	8*360
The first enclosed quantity(kg)	4000	4000	4000	4500	4500	8000	11000
Roll brush adjusting height(mm)	200	200	350	450	600	850	900
Airness capacity(m³/h)	22000	17560	19000	19500	27758	28050	38000
Exterior size(mm)	25014*4500*9015	12180*4250*7095	15200*5370*6797	30650*6850*9095	31200*8078*7500	44042*6385*7758	45000*7830*11117
Total power(except for dust cleaning)(kw)	90	78.3	113.5	156.6	204.8	224.55	293.6

Conveyor system

It consists of loading and unloading rollers, chamber rollers, connecting rollers.
Rollers in the blasting cabinet are protected by special alloy jacket with lifetime over 4,000 hours.
Conveyor system is driven by motors with inverter. Rollers can be controlled manually and automatically.
Step-less speed is available. Roller conveyor could move in step with the whole machine or move faster.

Blasting chamber

In the blasting chamber, the wall is protected by SPMn13 material liner and 65Mn protective liner, which has high wear resistant performance. Chamber inside protection plate all adopt the high strength nut fixed and pressure on the inner of blasting chamber, easy tear open outfit replacement. Prolong service life, reduce the cost and reduce maintenance frequency. The steel abrasive fall down freely and collected by screw conveyor.

Screw conveyorScrew conveyor consists of cycloid needle wheel decelerator, screw axis, conveyor shell, bearing, etc. It is a standard conveying device and an important part of abrasive circulating system. The screw blade is made of 16 Mn.This unit is responsible for conveying the abrasive to the elevator. Screw conveyor located at the bottom of shot blasting chamber, the spiral blade welding in the drive shaft. Conveyor motor drives screw conveyor to send abrasive to discharge outlet, then the mixed abrasive will be conveyed to elevator bottom. On both ends of the screw conveyor adopt triple seal protection. the abrasive and dust will drop to
the clearance between end plate and bearing once leak out, will not enter the bearing. Screw conveyor shaft with sensors detecting unit can detect the working state.

1	Q: How many days to produce this machine?
	A: Some standard machines in stock, can be delivered right away after your deposit.  Customized specially designed machine according to your specific requirement. From engineer designing to production completion, it needs about 30 to 50 days.
2	Q: What does your factory do regarding quality control?
	A: We pay much attention to quality control from the very beginning to the end. Each machine is assembled and carefully tested before shipment.
3	Q: What's your machine quality guarantee?
	A: Quality guarantee time is one year. We choose world famous brand components to keep our machine in perfect working condition.
4	Q: Could you give installation and commissioning overseas? How long will it take?
	A: Yes, we supply overseas service, customers shall pay for the engineers flight tickets and local transport, hotel, food.  Small machines usually takes 5 days, while big machines usually takes about 20 days even one or two months.
5	Q: How can I trust you to deliver the right machine as I ordered?
	A: We will absolutely deliver a good quality machine as we discussed and confirmed in the order. The core of our company culture is innovation, quality, integrity and efficiency. Puhua is ALIBABA's Golden supplier with BV assessment. You can check with ALIBABA. We have never got complaint from our customers.