CE manual blasting gun surface cleaning sand blasting room
sand blasting room features:
Automatic recycling sand blasting machine room is designed according to the product processing process and the product characteristic, it is mainly used for large frogings and castings welded steel structure, engineering machinery, indestrial boilers, chemical machinery, shot building,etc, to remove surface oxide skin, rust, and strengthen surface, to improve the coating adhesion,etc. This type machine is mainly composed of six parts: sand blasting chamber, sand blasting system, sand recycling system, ventilation and dust removal system, lighting and electrical control system.
Non-standard Equipment Professional Customization Design Service!
Sand blasting room is mainly used for surface cleaning and strengthening of steel, castings, aluminum alloy parts and other parts. Through the shot blasting can remove the complex work piece surface contamination, the oxide skin, welding slag, the waste paint and so on, causes the work piece surface to be bright and clean, simultaneously reduce the work piece internal stress, enables the work piece surface to obtain the strengthening, thus achieves enhances the work piece surface and the intrinsic quality goal.
Advantages:
| 1 |
Improve the corrosion resisting ability of machinery products and metal materials. |
| 2 |
Improve bonding strength of steel surfaces and coatings. |
| 3 |
Increase the anti-fatigue capability of metal products and extend its life. |
| 4 |
Optimize the craftwork state of steel surface. |
| 5 |
Greatly enhance the efficiency of cleaning. |
| 6 |
Reduce the labor intensity of cleaning works. |
| 7 |
Reduce the environment pollution. |
Sand blasting room main compositions:
| 1 |
Blasting chamber |
| 2 |
Abrasive storage hopper |
| 3 |
Blasting assembly |
| 4 |
Bucket elevator |
| 5 |
Screw conveyor |
| 6 |
Elevator |
| 7 |
Roller conveyor |
| 8 |
Separator |
| 9 |
Abrasive recycling system |
| 10 |
Lighting system |
| 11 |
Dust Collector |
| 12 |
Steel grating |
| 13 |
Trolley system |
| 14 |
Electric control system |
Structural characteristics:
Sand blasting system
We fully take into account the operation convenience of the workers, specifically increased the sand blasting chamber operating space, set lighting system and platform, so that workers can operate convenient, effective and comprehensive.
Bucket Elevator
The bucket elevator consists of speed reducer, upper and lower rolling barrel, transmission rubber belt, bucket elevator, enclosure and tightening device, etc.
Separator
This machine adopts advanced Model BE full shutter type separator. The separator is mainly composed of airwash area, barrel sift, conveying screw, abrasive hopper, manual abrasive controlling valve.
Abrasive recycling system
This machine adopts the patented shot valve produced of our company; it can accumulate a certain time in blasting, through the manual control to provide the shot ball to the blasting device.
Dust removal system
This machine adopts Cartridge or bag type dust collector, is exhausted air produced during working. The dedusting efficiency is up to 99.6%, powder density is less than 100mg/m3,much stricter than the national standard.
Electric control system
Set shot ball circulatory failure alarm function, if any parts of the system fails, the above components automatically stop running, to prevent the shot ball stuck and burning power device.
Our service:
| 1 |
Reply your inquiry in 24 hours. |
| 2 |
Experienced staffs answer all your questions in time. |
| 3 |
Customized design is available. |
| 4 |
Exclusive and unique solution can be provided to our customer by our professional engineers and staff. |
| 5 |
Special discount and protection of sales are provided to our distributor. |
| 6 |
We are professional manufacturer of shot blasting Machine.
Have a professional design team with more than 10 years design experience engineers, competitive with good quality |
| 7 |
As an honest seller, we always use superior raw material, advanced machines, skilled technicians to ensure our products to be finished in high quality and stable feature. |
| 8 |
Prompt delivery, site installation and commissioning. |
Notice:
According to your requirements, the most suitable machine will be designed for your workpieces, please indicate the following details.
1. What kind of workpiece you clean?
2. The workpiece size, length, width, height and weight of maximum workpiece.
3. What's your production capacity per day (8 hours)?
4. It's my pleasure if you can provide details workpiece photos to us.
Based on these details information, the detailed technical proposals will be sent to you for reference.
After-sale service:
1. Installation and commissioning issue: We will send one technicians to assist with machine installation and commissioning, customer pays for return tickets, hotel and diet. Customer need arrange skilled worker and prepare various installation machinery and tools.
2. Warranty time:12 months from date of commissioning completion, but no more than 18 months from date of delivery.
3. Supply full english documents: including general installation drawings, pit design drawings, manual book, electric wiring diagram, electric manual book and maintenance book, etc.
4. Exported experience : Many countries, such as The USA, Russia, UK, Ukraine, Australia, Malaysia, UAE, Egypt, Mexico, Brasil, etc.
5. Our shot blasting spare parts are high quality with 20% High Chrome, ZGMn13, Mn65, etc.
Trade Information:
MOQ: 1set.
Settlement Currency: USD, RMB, EUR.
Trade mode: FOB (FCA), CIP, CFR, CIF, DDU, DDP, Turnkey.
Payment term: 30% deposit by T/T, the balance should be paid before delivery or L/C at sight.
Delivery time: Within 20-60 days according to different type equipment.
Any question pls kindly contact with us.
Warmly welcome you to visit our factory in Qingdao!
Audited Supplier 
){kind=link}