Q69 Type Conveyor Shot Blasting Machine For Steel Profiles
Q69 Type Roller conveyor shot blasting machines are mainly used for treating long and/or flat components. The components continuously pass through the pre chamber, the blasting chamber, and the cleaning chamber on a special roller conveyor. Highly efficient turbines fixed on the machine housing make it possible to treat the components on all sides.
| Type |
Q698 |
Q6912 |
Q6915 |
Q6920 |
Q6925 |
Q6930 |
Q6940 |
| The effective cleaning width(mm) |
800 |
1200 |
1500 |
2000 |
2500 |
3000 |
4000 |
| The room feed-in size(mm) |
1000*400 |
1400*400 |
1700*400 |
2200*400 |
2700*800 |
3200*800 |
4200*400 |
| The length of cleaning workpiece(mm) |
1200-12000 |
1200-1600 |
1200-12000 |
1200-12000 |
3000-12000 |
2400-12000 |
4500-18000 |
| The speed of wheel conveyer(m/min) |
0.5-4 |
0.5-4 |
0.5-4 |
0.5-4 |
0.5-4 |
0.5-4 |
0.5-4 |
| The thicksness of cleaning steelsheet(mm) |
3-60 |
3-60 |
1.5-60 |
3-60 |
3-60 |
3-110 |
4.5-100 |
| The section steel specification(mm) |
800*300 |
1000*300 |
1500*300 |
2000*300 |
2500*700 |
3000*700 |
4000*300 |
| The quantity of shot blasting(kg/min) |
4*180 |
4*250 |
4*250 |
6*250 |
6*250 |
6*360 |
8*360 |
| The first enclosed quantity(kg) |
4000 |
4000 |
4000 |
4500 |
4500 |
8000 |
11000 |
| Roll brush adjusting height(mm) |
200 |
200 |
350 |
450 |
600 |
850 |
900 |
| Airness capacity(m³/h) |
22000 |
17560 |
19000 |
19500 |
27758 |
28050 |
38000 |
| Exterior size(mm) |
25014*4500*9015 |
12180*4250*7095 |
15200*5370*6797 |
30650*6850*9095 |
31200*8078*7500 |
44042*6385*7758 |
45000*7830*11117 |
| Total power(except for dust cleaning)(kw) |
90 |
78.3 |
113.5 |
156.6 |
204.8 |
224.55 |
293.6 |
It consists of loading and unloading rollers, chamber rollers, connecting rollers.
Rollers in the blasting cabinet are protected by special alloy jacket with lifetime over 4,000 hours.
Conveyor system is driven by motors with inverter. Rollers can be controlled manually and automatically.
Step-less speed is available. Roller conveyor could move in step with the whole machine or move faster.
Blasting chamber
In the blasting chamber, the wall is protected by SPMn13 material liner and 65Mn protective liner, which has high wear resistant performance. Chamber inside protection plate all adopt the high strength nut fixed and pressure on the inner of blasting chamber, easy tear open outfit replacement. Prolong service life, reduce the cost and reduce maintenance frequency. The steel abrasive fall down freely and collected by screw conveyor.
Screw conveyorScrew conveyor consists of cycloid needle wheel decelerator, screw axis, conveyor shell, bearing, etc. It is a standard conveying device and an important part of abrasive circulating system. The screw blade is made of 16 Mn.This unit is responsible for conveying the abrasive to the elevator. Screw conveyor located at the bottom of shot blasting chamber, the spiral blade welding in the drive shaft. Conveyor motor drives screw conveyor to send abrasive to discharge outlet, then the mixed abrasive will be conveyed to elevator bottom. On both ends of the screw conveyor adopt triple seal protection. the abrasive and dust will drop to
the clearance between end plate and bearing once leak out, will not enter the bearing. Screw conveyor shaft with sensors detecting unit can detect the working state.
| 1 |
Q: How many days to produce this machine? |
A: Some standard machines in stock, can be delivered right away after your deposit.
Customized specially designed machine according to your specific requirement.
From engineer designing to production completion, it needs about 30 to 50 days. |
| 2 |
Q: What does your factory do regarding quality control? |
| A: We pay much attention to quality control from the very beginning to the end. Each machine is assembled and carefully tested before shipment. |
| 3 |
Q: What's your machine quality guarantee? |
| A: Quality guarantee time is one year. We choose world famous brand components to keep our machine in perfect working condition. |
| 4 |
Q: Could you give installation and commissioning overseas? How long will it take? |
A: Yes, we supply overseas service, customers shall pay for the engineers flight tickets and local transport, hotel, food.
Small machines usually takes 5 days, while big machines usually takes about 20 days even one or two months. |
| 5 |
Q: How can I trust you to deliver the right machine as I ordered? |
| A: We will absolutely deliver a good quality machine as we discussed and confirmed in the order. The core of our company culture is innovation, quality, integrity and efficiency. Puhua is ALIBABA's Golden supplier with BV assessment. You can check with ALIBABA. We have never got complaint from our customers. |
){kind=link}