Q32 Seriess Tumble Belt Shot Blasting Machine
Machine Description:
Supply Professional Customization Design Service. Can design most suitable machine according to your details requirement and workpiece!
Technological strength:
1.The first dedicated shot blasting machine for office building outside wall decoration marble in China;
2.The first dedicated shot blasting machine for aggrandizement floor grinding tool in China;
3.The first dedicated shot blasting machine for high-speed rail, filled the domestic blank in China;
4.The first dedicated shot blasting machine for crystalline silicon;
5.The first dedicated shot blasting machine for oil field special-purpose cable tray;
Shot Blasting Machine Introduct:
Shot blasting machine is a cleaning effect , compact structure, low noise, complete and good cleaning equipment, has the following characteristics:
1. The machine uses cantilever centrifugal blast wheel, has a long life, simple structure and other characteristics.
2. By full curtain winnowing abrasive mixture separator, with good separation effects and higher productivity, has a positive effect to improve the life of the blasting blade.
3. Use wear-resistant rubber track, decreasing workpiece collision damage phenomenon and then reduce the noise of the machine.
4. Use pulse dust collector, dust can be collected in the dust hopper or exclude to outdoors, improve the labor environment.
Technical Parameters:
| Item |
Unit |
Q326 |
Q3210 |
| Productivity |
kg/h |
600-1200 |
2500-3500 |
| Feeding amount |
Kg |
200 |
800 |
| Maximum weight of single piece |
Kg |
15 |
30 |
| End plate diameter |
mm |
650 |
1000 |
| Effective volume |
m3 |
0.33 |
1.05 |
| Abrasive flow rate |
Kg/min |
200 |
250 |
| Dust removal air volume |
m3/h |
2500 |
4000 |
| Power consumption |
kw |
13.6 |
25.6 |
| Outside dimension |
mm |
3200*1650*3800 |
4290*1950*4500 |
Technical specification of Q3210 shot blasting machine
1.Components and function
Q3210 shot blasting machine consists of blasting system, blasting chamber, abrasive circulation system (separator, bucket elevator, screw conveyor), dust collection system and electric control system. The surface finish level is Sa2.5.
2.Shot blasting system
Shot blasting system consists of blasting chamber and shot blasting machine assembly. The abrasive media like the steel shots, grits are applied on the metal surface driven by the centrifugal force from the blades. Workpieces will be de-rusted, cleaned and roughened in blasting system to reach customer's finishing level.
3.Blasting chamber
Blasting chamber is welding structure, inside has rubber belt and drive mechanism, at the bottom of the chamber has a screw conveyor, indoor adopts wear-resisting guard protection, blast wheel fixed on the top of the chamber. In the blasting chamber, the end disk is protected by ZGMn13 material, which has high wear resistant performance. Prolong service life, reduce the cost and reduce maintenance frequency.
4.Shot blasting machine assembly
This machine has 1 set of high speed & performance blast wheels. One blast wheel has eight blades. It takes 5 to 10 minutes to replace 8 pieces of blades. Material of blades, control cage and distributor is Cr20S high-chromium cast iron (USA: 5115G51150 Model), which has long service life. Generally speaking, lifetime of blade is over 500 hours, and lifetime of impeller and control cage is over 800 hours. All wear parts are the market most universal national standard parts.
5.Abrasive circulation system
The system includes following parts: hopper, abrasive flow pipe, abrasive control valves, screw conveyors, bucket elevator, separator.
6.Screw conveyor
Screw conveyor consists of cycloid needle wheel decelerator, screw axis, conveyor shell, bearing, etc. It is a standard transverse conveying device, an important part of abrasive circulating system. The screwing blade is made of 16Mn.
This unit is responsible for convying the abrasive to the elevator. Screw conveyor located at the bottom of shot blasting chamber, the spiral blade welding in the drive shaft. Conveyor motor drives screw conveyor to send abrasive to discharge outlet, then the mixed abrasive will be conveyed to elevator bottom.
On both ends of the screw conveyor adopt triple seal protection. the abrasive and dust will drop to the clearance between end plate and bearing once leak out, will not enter the bearing. Screw conveyor shaft with sensors detecting unit can detect the working state.
Company Information:
Qingdao Puhua Heavy Industrial Machinery Co., Ltd. was founded in 2007. We focus on designing, researching and developing, manufacturing and selling shot blasting machine, CNC punching machine, sand preparation equipment, moulding core production equipment, and environmentally-friendly dedusting equipment, etc.We have more than 60 self-developed designs and molds for your choice. With our rich experience and considerate services, we have been recognized as a reliable supplier for many international buyers.
Our Service:
1. Installation and commissioning issue:
We will send 1-2 technicians to assist with machine installation and commissioning,
customer pays for their tickets, hotel and diet, etc Customer need arrange
3-4 skilled worker and prepare insallation machinery and tools.
2. Warranty time:
12 months from date of commissioning completion
3. Supply full English documents:
including foundation drawings, manual book, electric wiring diagram, electric manual book and maintenance book,etc.
Audited Supplier 
){kind=link}
){kind=link}